You are here: Home > Adapters & Misc
Sort By:
Page of 1  
Xtreme Motor Pinion (2.3MM hole) MR1
Our Price: $2.90 (Out of Stock)

Motor Pinion gear for 2.3mm shaft motor
Tenergy TP to Tenergy 3s Adapater
Our Price: $3.99 (Out of Stock)

Converts TP "thunder Power" style balance plug to Eflite/Tenergy balance plug
For 3 cell batteries.
E-sky - E-flite Charger Power Supply R5H
Our Price: $12.95
Sale Price: $9.95 In Stock!

Input 110V-240V Output 12V  1.5 amps USA
Works with CX, CX2 and CX3 stock charger
Xtreme Motor Plug MR1
Our Price: $1.90 In Stock!

Xtreme Motor Plug.  Replacement motor plugs for stock 180 motors or SE motors
Xtreme Motor Pinion (2.0mm hole) MR1
Our Price: $2.90 (Out of Stock)

Xtreme Motor Pinion (2.0mm hole)
Xtreme Motor Pinion 8T (180 motor) MR1
Our Price: $3.90 In Stock!

Xtreme Motor Pinion 8T (180 motor)
BoomTownHobbies lipo battery monitor R3M
Our Price: $14.99
Sale Price: $8.99 In Stock!

Plugs into the balance port of a 2 cell up to a 6 cell battery and reads the voltage of each cell on your battery.
Futaba Unassembled J Gold Plated Connector
Our Price: $0.95 (Out of Stock)

Futaba Unassembled J Gold Plated Connector
Xtreme Over-Current protection / Resetable Fuses 180 motors pair PTC MR1
Our Price: $5.20
Sale Price: $3.99 In Stock!

Plug and Play PTC fuses work with the CX CX2 CX3 and Lama V3 V4
Align 325 Carbon Night Blade Pack/3K
Our Price: $41.99 (Out of Stock)

Align 325 Carbon Night Blade Pack/3K
FUSUNO Holo-Blade Decals SF10
Our Price: $7.00
Sale Price: $4.80 (Out of Stock)

Fusuno Blade Decals fits 400-450 size helis such as Trex 450, Blade 400 and Belt CP.
These are decals only, blades sold separately.
FUSUNO Reflective Hologram Tail Blade Decal
Our Price: $1.75 In Stock!

The Holographic blade decals produce very nice and cool compact disks look when you are flying under sunshine and when you hit the right angle you can also see the design in 4 to 6 places when the blades are spinning. This is an awesome effect.
Xtreme LED Light - White (spare parts for EA-020) MR1
Our Price: $0.99 In Stock!

Xtreme LED Light - White (spare parts for EA-020)
Xtreme LED Light -Yellow (spare parts for EA-020) MR1
Our Price: $0.99 In Stock!

Xtreme LED Light -Yellow (spare parts for EA-020)
Xtreme LED Light -Red (spare parts for EA-020) MR1
Our Price: $0.99 In Stock!

Xtreme LED Light -Red (spare parts for EA-020)
Xtreme LED Light -Green (spare parts for EA-020) MR1
Our Price: $0.99 In Stock!

Xtreme LED Light -Green (spare parts for EA-020)
Xtreme Sponge Double Side Tape (150 x 20mm) MR1
Our Price: $1.90 In Stock!

Xtreme Sponge Double Side Tape (150 x 20mm)
Xtreme Receiver Antenna wire Cable MR1
Our Price: $2.60 In Stock!

Xtreme Receiver Antenna Cable (600mm x 2 pcs)
Xtreme Main Blade Sponge Holder-v2 (300 to 450 size heli) MR1
Our Price: $2.85 In Stock!

Xtreme Main Blade Sponge Holder-v2 (300 to 450 size heli)
Xtreme Battery Plug (JST to Dean) MR1
Our Price: $2.85 In Stock!

JST to Dean conversion Battery Plug
Xtreme Battery Plug Dean to JST MR1
Our Price: $2.85 In Stock!

Dean to JST conversion plug
Xtreme Stabilizer for neck strap (Futaba, JR, Spektrum transmitter) MR1
Our Price: $9.90 In Stock!

Xtreme Stabilizer for Neck Strap (Futaba, JR, Spektrum transmitter)
Kick Ass parts tray
Xtreme Aluminium Parts Tray Large ** Special ** MR1
Our Price: $29.95
Sale Price: $19.90 In Stock!

Xtreme Aluminium Parts Tray with Magnetic surface
(125x125mm)
FUSUNO Holo-Blade Decals SF12
Our Price: $7.00
Sale Price: $4.80 (Out of Stock)

Fusuno Blade Decals fits 400-450 size helis such as Trex 450, Blade 400 and Belt CP.
These are decals only, blades sold separately.
Xtreme Motor Pinion (3.17 mm hole) MR1
Our Price: $3.90 (Out of Stock)

Xtreme Motor Pinion (3.17 mm hole)
Choose 11T, 12T, 13T, 14T, or 15T
Xtreme Brushed to Brushless converter MR1
Our Price: $14.90
Sale Price: $13.99 In Stock!

Brushless system has a higher efficiency and more powerful setup compare to the conventional brushed power system. However, most Ready-to-Fly/ Ready-to-Run kits are supplied with all-in-one system, which may have receiver, brushed motor speed controller (ESC), gyro and signal-mixing board integrated in one piece device, such as the 4-in-1 board on LAMA helicopter and some RC racing toy boats. The all-in-one board becomes a challenge for those modelers who wish to upgrade their existing brushed motor system.

This brushless converter is the product to solve this problem.

** This product is ONLY suitable with single-direction brushed system, which could NOT be applied on reversible brushed system.
Xtreme Battery Straps 210mm MR1
Our Price: $2.95 In Stock!

Xtreme Battery Straps 210mm X 10mm 3 pcs.
Xtreme Velcro 20X20mm 6 pcs MR1
Our Price: $2.50 In Stock!

Xtreme Battery Straps 260mm MR1
Our Price: $3.50 In Stock!

Xtreme Battery Straps 260mm X 15mm 3 pcs.
Xtreme Battery Straps 365mm MR1
Our Price: $3.95 In Stock!

Xtreme Battery Straps 365mm X 15mm 3 pcs.
Xtreme 3 port Charging cable for Walkera batteries MR2
Our Price: $2.95 In Stock!

Use a 3 cell charger port to charge 3 batteries at a time!
Xtreme 3 port Charging cable for MCX and MSR batteries MR2
Our Price: $4.65 In Stock!

Use a 3 cell charger to charge 3 batteries at a time!
Xtreme 3 port Charging cable for MCPX batteries MR2
Our Price: $4.85 In Stock!

Use a 3 cell charger to charge 3 batteries at a time!
HeliOption Lipo Safe Bag
HeliOption Lipo Safe Bag (190 x 80 x 70 mm) ** New **
Our Price: $14.50
Sale Price: $11.95 In Stock!

Fire resistant charging and storage bag for all your Li-Po batteries.
HeliOption Maglev Blade Balancer (for 300 to 700 class blades)
HeliOption Maglev Blade Balancer (for 300 to 700 class blades)
Our Price: $39.95
Sale Price: $29.99 In Stock!

High Quality Blade Balancer works with 2.0mm-5.0mm mounting holes.
Works great for a Blade SR, 450 and all the way up to a Trex 700.
HeliOption Bearing Oil (with Nano Titanium Particles)
HeliOption Bearing Oil (with Nano Titanium Particles)
Our Price: $7.99 In Stock!

For All Bearing including Main Bearings and Motor Bearings.
Keep your heli a Fine Oiled Machine!
HeliOption Cleaning Clay (85 g)
HeliOption Cleaning Clay (85 g)
Our Price: $11.95 In Stock!

This is a amazing cleaning tool, it is designed to absorb and digest dirt, fuel, grease dust and oil residue.
Quick Change mounts for the 500
HeliOption Quick Change Canopy Mounts Trex 500
Our Price: $18.90 In Stock!

20mm quick release mounts Fits Trex 500
Quick Change mounts for the 550
HeliOption Quick Change Canopy Mounts Trex 550
Our Price: $18.90 (Out of Stock)

25.5mm quick release mounts Fits Trex 500
HeliOption Quick Change Canopy Mount (16mm) 600E Pro
HeliOption Quick Change Canopy Mount (16mm) 600E Pro- 2 pcs
Our Price: $18.90 In Stock!

16mm quick release mounts Fits Trex 600E Pro
Xtreme Motor Pinion 12T (1.95mm hole, 0.4M) (SR120)
Xtreme Motor Pinion 12T (1.95mm hole, 0.4M) (SR120) MR2L
Our Price: $2.30 In Stock!

12 Teeth Pinion for the SR120
HeliOption Quick Change Canopy Mount (32mm) 600E Pro
HeliOption Quick Change Canopy Mount (32mm) 600E - 2 pcs
Our Price: $18.90 In Stock!

32mm quick release mounts Fits Trex 600E
HeliOption Comfort Neck Strap  w/cusion pad
HeliOption Comfort Neck Strap w/cushion pad
Our Price: $18.70
Sale Price: $14.85 In Stock!

Adjustable Neck strap for all transmitters.
This strap is nicely padded and very comfortable!
Xtreme Comfort Neck Strap w/cusion pad
Xtreme Comfort Neck Strap w/cushion pad
Our Price: $17.30
Sale Price: $13.95 In Stock!

Adjustable Neck strap for all transmitters.
This strap is nicely padded and very comfortable!
Xtreme Leveling Tool for Swash (GCP, Mini CP, SP125, V120D02SV2)
Xtreme Leveling Tool for Swash (GCP, Mini CP, SP125, V120D02SV2)
Our Price: $8.50 (Out of Stock)

Xtreme Leveling Tool for Swash (GCP, Mini CP, SP125, V120D02SV2)
Xtreme Charging Cable for 3pcs Solo Pro 125 1s Lipo
Xtreme Charging Cable for 3pcs Solo Pro 125 1s Lipo MR2L
Our Price: $3.98 In Stock!

Charge 3 batteries at once using a 3 cell charger.