|
|
|
|
|
|
Microheli CNC lower grip.
|
Our Price: $29.99
|
|
|
The CNC grips for the Blade CX2 will allow you to use folding blades such as the Xtreme Hard blades
|
|
|
|
|
|
|
|
|
|
|
|
|
Microheli CNC Main Frame
|
|
Our Price: $36.99
|
|
|
The Precision CNC Main Frame is designed to replace plastic stock main frame on the Blade CX2 helicopters.
|
|
|
|
|
|
|
|
|
|
|
|
|
Microheli cnc upper grips
|
|
Our Price: $29.99
|
|
|
The CNC grips for the Blade CX2 will allow you to use folding blades such as the Xtreme Hard blades
|
|
|
|
|
|
|
|
|
|
|
|
|
Micro Heli Aluminum battery tray Blade CX/2
|
|
Our Price: $29.99
|
|
|
One of the most breakable parts on the Blade CX is the plastic battery tray that is very annoyable when replacement and causing a lot of vibration if the battery is not fully secured. The CNC aluminum battery tray is designed to virtually eliminate the chance of breaking the battery tray by machining the battery tray with strong aircraft aluminum material. It is designed to improve durability of the battery tray on E-FLITE Blade CX and CX2 helicopters.
|
|
|
|
|
|
|
|
|
|
|
|
|
DN Power/ Tenergy 900mAH 10c CX2 Battery Pack
|
Our Price: $19.99
Sale Price: $18.65
You Save $1.34!
|
|
|
This Lithium polymer battery is rated at 900mAH 10C and is made for the Blade CX and CX/2. The stock battery is rated at 800mAh which means you will notice longer run times with this battery. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications. It is a direct replacement but a better battery. The DN Power batteries are high quality and an exceptional value! If you are looking for even more performance out of your battery please look at our DN Power chargers. They can charge two batteries at the same time and give a 100% charge compared to the e-flight charger which only charges the battery in safe mode to around 90% of full capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
DN Power/ Tenergy 900mAH 25C CX2 Battery Pack **New**
|
|
Our Price: $24.95
|
|
|
The newest DN Power battery upgrade for the Eflite Blade CX2. Not only do you gain 12% more flight time over stock battery, but now the pack can deliver more than twice the power with its 25C rating, which is beyond almost any other battery out there. As with all DN Power batteries for the Blade CX2, they fit the stock battery tray perfectly and work with the stock charger.
This Lithium polymer battery is rated at 900mAH 25C and is made for the Blade CX and CX/2. The stock battery is rated at 800mAh which means you will notice longer run times with this battery. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications. It is a direct replacement but a better battery. The DN Power batteries are high quality and an exceptional value! If you are looking for even more performance out of your battery please look at our DN Power chargers. They can charge two batteries at the same time and give a 100% charge compared to the e-flight charger which only charges the battery in safe mode to around 90% of full capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tenergy 900 10C CX2 Battery Combo **2 battery combo**
|
|
Our Price: $32.99
|
|
|
2 Tenergy/DN power 900mAH 10c high output batteries for the Blade CX2.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Bearing F4x8x3 for Micro Heli main frame - CX2
|
|
Our Price: $7.20
|
|
|
Replacemnet flange bearings for the MicroHeli CX2 Main Frame
|
|
|
|
|
|
|
|
|
|
|
|
|
MicroHeli Innershaft Aluminum Bearing Housing /w Bearing
|
|
Our Price: $5.99
|
|
|
The Innershaft Aluminum Bearing Housing is designed to replace the stock plastic bearing housing. It matches perfectly with the MicroHeli Blade CX aluminum head and blade grips and machined with high tolerance to avoid any unwanted slop in the bearing housing. Available in Blue or Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
MicroHeli Precision CNC Stabilizer Flybar Weight
|
|
Our Price: $14.99
|
|
|
The CNC aluminum flybar weight is designed to replace stock plastic flybar weights. The new designed flybar weights are made of CNC aluminum to provide very accuracy in weight thus improving vastly on weight distribution on the flybar. This feature is very important to avoid unstability of the heli due to weight difference on each side of the flybar. The flybar weights are also secured tightly on the flybar by two CNC delrin inserts and are locked into secured and correct position on the flybar rod by four (4) set screws. This is to make sure the flybar weights are not pulled out in flights and also can avoid unbalance flybar weight position on the flybar rod. The plastic flybar weights are slimsy and easy to move in or out of the flybar rod under rotational forces during flights. With this new design, it is not only providing great and professional look on your Blade CX helicopters, it also prevents play and uneven weight distribution on the flybar rod of the stock flybar weight thus improving greatly the stability of the E-FLITE Blade CX and CX2 helicopters. Available in Blue or Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
MicroHeli CNC Lower Head/Hub (Silver)-Blade CX2
|
|
Our Price: $24.99
|
|
|
One of the most breakable parts on the Blade CX is the set of shoulder pin supporting the lower blade grips on lower head center. The Precision CNC Lower Head is designed to greatly reduce the chance of breaking the shoulder pins by machining the whole head block with strong aircraft aluminum material and thus strengthening the lower head as a whole. It is designed to improve head performance on EFLITE Blade CX helicopters.
|
|
|
|
|
|
|
|
|
|
|
|
|
Microheli Precision CNC Swashplate (SILVER) - Blade CX2
|
|
Our Price: $26.99
|
|
|
The Precision CNC Swashplate is designed to replace stock plastic swashplate of the Eflite Blade CX helicopters. It is 100% CNC machined to provide precision for cyclic performance. The light and stylish high quality aircraft aluminum blade grips brings more stability to the E-FLITE Blade CX helicopters.
|
|
|
|
|
|
|
|
|
|
|
|
|
MicroHeli InnerShaft w/ Aluminum Main Rotor Hub (SILVER)
|
Our Price: $19.99
Sale Price: $15.99
You Save $4.00!
|
|
|
The InnerShaft and Aluminum Main Rotor Hub for Blade CX/ Lama 2 is designed to improve the strength of the stock innershaft and stock plastic main rotor hub. The new innershaft and main rotor hub includes a new strong steel innershaft, a bigger and stronger steel spindle shaft and a precision CNC aluminum main rotor hub. This system not only reduces the chance of broken main rotor hub and innershaft but also provides a new great look for your blade CX or Lama 2.
|
|
|
|
|
|
|
|
|
|
|
|
|
MicroHeli Steel InnerShaft for MH-CX065 - Blade CX2
|
|
Our Price: $3.99
|
|
|
MicroHeli Steel InnerShaft for MH-CX065 - Blade CX2
|
|
|
|
|
|
|
