|
|
|
|
|
|
Xtreme Aluminum Swash Plate, Lama V3,V4 ** Special Price ** R1M
|
Our Price: $15.80
Sale Price: $12.99
(Out of Stock)
|
|
|
Xtreme Aluminum Swash Plate, Lama V3,V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Ext. Head w/Inner Shaft Ver 2 (+8 mm) Lama V3 V4 R1M
|
|
Our Price: $11.80
In Stock!
|
|
|
Reduce blade strikes with this taller aluminum head with inner shaft.
Fits Esky Lama V3, V4 and equivalent
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme 850 mAh 30c Li-Po battery V3 V4 ** Special ** R6L
|
|
Our Price: $19.90
(Out of Stock)
|
|
|
This is the best pack available for the Lama V4. It has a 30c discharge rate and can be charged up to 5C!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Carbon fiber Composite blade grips for Esky Lama (Upper and Lower)
|
Our Price: $24.99
Sale Price: $19.99
In Stock!
|
|
|
Upper and Lower grips for Lama V3/V4.
Works w/stock blades and Hard blades sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Magnetic Blade Balancer Silver base with 1.0-2.0mm balancer MR1
|
Our Price: $21.90
Sale Price: $17.95
In Stock!
|
|
|
Base/Balancer combo with 1.0-2.0mm balancer.
Great for CX2/CX3 that have blade grips and folding blades.
Great for MSR, Lama V4 SR120 and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Lama V4 Outdoor Pro Kit ** New Low Price **
|
Our Price: $54.99
Sale Price: $44.50
In Stock!
|
|
|
Stage 1 includes canopy choice, M4 boom kit, Unbreakable skids, carbon fiber battery mod and body rods.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Aluminum Lower Rotor Hub ** New Version 2 ** R1L
|
|
Our Price: $10.90
(Out of Stock)
|
|
|
Xtreme Aluminum Lower Rotor Hub fits the Lama V3,V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Tail Boom Kit Set V2 (For Lama v4, dauphine, hunter, etc) R1L
|
|
Our Price: $14.99
In Stock!
|
|
|
New Version 2 Tail Boom for the Lama V4
Skids and Canopy are sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Model 4 Boom Kit CX CX2 CX3 Lama V4 Yellow * Limited edition * R3M
|
Our Price: $21.99
Sale Price: $19.99
In Stock!
|
|
|
New Model 4 boom kit in yellow. Click for more info.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Ext. Head w/Inner Shaft Ver 2 (+12 mm) Lama V3 V4 R1M
|
|
Our Price: $11.80
In Stock!
|
|
|
Reduce blade strikes with this taller aluminum head with inner shaft.
Fits Esky Lama V3, V4 and equivalent
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Model 4 Boom Kit CX CX2 CX3 Lama V4 R3M
|
|
Our Price: $19.99
In Stock!
|
|
|
New Model 4 boom kit. Click for more info.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Upper (1 pair) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Landing Skid Set V2 (For Lama v4, dauphine, hunter, etc)
|
|
Our Price: $12.99
(Out of Stock)
|
|
|
New Version 2 skids for the Lama V4
Tail boom kit and Canopy are sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Pre-Painted Canopy-Yellow (For Lama v4, dauphine, hunter, etc)
|
|
Our Price: $12.95
In Stock!
|
|
|
Pre-Painted canopy comes with decals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Upper 3 pack (3 pairs) R1H
|
Our Price: $8.99
Sale Price: $7.49
In Stock!
|
|
|
Direct replacement for Lama V3 and V4 helis. Blade CX2's require blade grips installed. Includes 3 pairs of blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Lower (1 pair) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Pre-Painted Canopy-Black (For Lama v4, dauphine, hunter, etc)
|
|
Our Price: $12.95
In Stock!
|
|
|
Pre-Painted canopy comes with decals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blades V2 Lower 55 deg R1H
|
|
Our Price: $3.49
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blades V2 Upper 55 deg R1H
|
|
Our Price: $3.49
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Lower 3 pack (3 pairs) R1H
|
Our Price: $8.99
Sale Price: $7.49
In Stock!
|
|
|
Direct replacement for Lama V3 and V4 helis. Blade CX2's require blade grips installed. Includes 3 pairs of blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Pro 6" Flybar CX2, CX3 D2
|
Our Price: $11.99
Sale Price: $9.99
In Stock!
|
|
|
6" short Flybar for Maximum performance and good stability. Thicker bar is now twice as strong!!!
Fits CX, CX2, CX3, Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme PRO 180 Bearing motors (pair) ** New ** R1L
|
Our Price: $29.95
Sale Price: $22.50
In Stock!
|
|
|
-Third Edition Ball Bearings 180 motor set for Blade CX2 and CX3.
-These motors replaced the very popular Xtreme SE 180 motors.
-Now with more power and better reliability at a great price!
-Includes A and B motors with plugs.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Sport 6.75" Flybar D2
|
Our Price: $11.99
Sale Price: $9.99
In Stock!
|
|
|
6.75" sport Flybar for Good performance and great stability. Thicker bar now twice as strong!!!
Fits CX, CX2, CX3, Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies full bearing set CX2 CX3 V4 upgrade R3M
|
|
Our Price: $12.95
In Stock!
|
|
|
Includes 4 premium bearings. (2) 4X8X3 (2) 2X6X3
Fit Blade CX,CX2 CX3 and Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme SE180 Bearing motors (pair) ** Discontinued **
|
|
Our Price: $22.99
(Out of Stock)
|
|
|
These motors are now discontinued. They have been replaced with the updated more powerful and reliable Xtreme Pro motors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme LED Fly-Bar Set v2 Blue (Esky Coaxial) R1L
|
|
Our Price: $14.95
In Stock!
|
|
|
All new design has better balance and more crash resistant than the Ver. 1 Flybar.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme LED Fly-Bar V2 Spare Parts Set R1L
|
|
Our Price: $5.95
(Out of Stock)
|
|
|
Spare Parts for the LED Flybar V2. Fits BCX303
Does not include electronics. Flybar and hardware only.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Carbon Fiber Body rod Canopy Shoring R3M
|
|
Our Price: $1.99
In Stock!
|
|
|
Ultra light weight carbon fiber Body rods fit the Lama V4 and other co-ax helis
|
|
|
|
|
|
|
|
|
|
|
|
|
E-Sky 72mhz Transmitter Lama V3 Lama V4
|
Our Price: $34.95
Sale Price: $19.00
In Stock!
|
|
|
72mhz Transmitter works with Lama V3 and V4.
Does not work with 2.4g helis. Crystals not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky USB Flight Simulator cable
|
|
Our Price: $4.99
In Stock!
|
|
|
This is the same cable that comes with most Esky Helis.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Transmitter Neck Strap (adjustable) MR1
|
|
Our Price: $6.60
In Stock!
|
|
|
Xtreme Transmitter Neck Strap (adjustable)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Carbon Pro Chassis (For Lama V4, dauphine, Comanche) R1L
|
|
Our Price: $45.90
(Out of Stock)
|
|
|
Xtreme Carbon Pro Chassis (For Lama V4, dauphine, Comanche)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Accessories for Carbon fiber Blade grips
|
Our Price: $3.90
Sale Price: $2.99
In Stock!
|
|
|
Xtreme Accessories for Carbon fiber Blade grips (ESL501)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme spare shaft for Extended Head R1M
|
|
Our Price: $3.95
In Stock!
|
|
|
Fits CX2 and Lama V3/V4 with Extended head. Replacement shaft only. Requires Extended head sold seperately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Ball linkrod set V3 V4 R1M
|
|
Our Price: $2.60
In Stock!
|
|
|
Xtreme Ball linkrod set V3 V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme metal bearing housing R1M
|
|
Our Price: $6.50
In Stock!
|
|
|
Reduces Shaft slop. This bearing housing has a very tight fit for zero slop. It comes with sand paper and you may have to sand down the shaft to get the bearing housing on the outer shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme motor brushes carbon (4) R1
|
|
Our Price: $3.69
In Stock!
|
|
|
Comes in a pack of four (2 required per motor)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme motor brushes silver combo (2 packs for 2 motors) R1
|
|
Our Price: $6.45
In Stock!
|
|
|
Includes two packages or (4 brushes) which will replace the brushes for two motors. The silver brushes provide more power than the stock carbon brushes however they do cost more.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Ultra Flex Skids Lama V4 R3M
|
Our Price: $7.99
Sale Price: $6.99
In Stock!
|
|
|
These skids are super flexable and do not break. They are the same proven desing as our CX2 heavy duty skids which have an excellent reputation for holding up even in a bad crash. These landing skids are so strong that we guarantee them for life!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Spare Head Cover for Extended Inner shaft R1M
|
|
Our Price: $2.60
In Stock!
|
|
|
Spare Head Cover for Extended Inner shaft
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Battery for LED Fly-Bar R1M
|
|
Our Price: $2.99
In Stock!
|
|
|
Replacement batteries for LED fly-bar
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Metal Fly-Bar Central Hub R1M
|
|
Our Price: $6.50
In Stock!
|
|
|
Metal Fly-Bar Central Hub replacement for LED fly bar
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Bearings 4x8x3 (2) R5H
|
Our Price: $5.95
Sale Price: $4.00
In Stock!
|
|
|
Bearings 4x8x3 (2)
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Plastic blade A - Lama V3, V4 - 1 Pair R5H
|
|
Our Price: $2.49
(Out of Stock)
|
|
|
Plastic blade A - Lama V3, V4 1 Pair
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Plastic blade B - Lama V3, V4 - 1 Pair R5H
|
Our Price: $2.49
Sale Price: $0.99
In Stock!
|
|
|
Plastic blade B - Lama V3, V4 1 pair
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Swashplate - LAMA V4 R5H
|
Our Price: $3.95
Sale Price: $1.99
In Stock!
|
|
|
Swashplate - LAMA V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Pinion Gear Remover MR1
|
|
Our Price: $15.90
In Stock!
|
|
|
Pinion Gear Remover
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky CNC Aluminum Collet Set ** special price ** R5h
|
Our Price: $46.00
Sale Price: $29.99
In Stock!
|
|
|
E-sky CNC Aluminum Collet Set for Lama V3/V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Blue) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Blue) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Yellow) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Yellow) R1H
|
|
Our Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Canopy Clear W/Black&Grey decals (Lama V4 CX2) D12
|
|
Our Price: $9.99
In Stock!
|
|
|
Xtreme canopy fits Lama V4 comes with Black and Grey decals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Canopy Clear w/Color decals (Lama V4 CX2) D12
|
|
Our Price: $9.99
In Stock!
|
|
|
Xtreme canopy fits Lama V4 comes with Colored decals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Landing Skid Set Lama V4 * Special * R1L * Special *
|
Our Price: $11.80
Sale Price: $8.99
(Out of Stock)
|
|
|
The xtreme conversion kit turns your Lama v4 into a sport-look helicopter.
You will need the ESL401, ESL402, ESL403 to complete the conversion.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Graphite Tail boom Kit Lama v4 * Special * R1L
|
Our Price: $22.90
Sale Price: $19.99
(Out of Stock)
|
|
|
The xtreme conversion kit turns your Lama v4 into a sport-look helicopter.
You will need the ESL401, ESL402, ESL403 to complete the conversion.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Over-Current protection / Resetable Fuses 180 motors pair PTC MR1
|
|
Our Price: $5.20
In Stock!
|
|
|
Plug and Play PTC fuses work with the CX CX2 CX3 and Lama V3 V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Receiver Antenna wire Cable MR1
|
|
Our Price: $2.60
(Out of Stock)
|
|
|
Xtreme Receiver Antenna Cable (600mm x 2 pcs)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Mini Antenna Tube - Black MR1
|
|
Our Price: $2.60
(Out of Stock)
|
|
|
Mini Antenna Tube - Black (2pcs, 135mm x 4mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Parts for Extended shaft Lama V3 V4 R1M
|
Our Price: $2.85
Sale Price: $1.99
In Stock!
|
|
|
Spare parts set for the version 2 extended upper head.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky V3 V4 A Motor w/pinion ** Open Box No Screws ** R5
|
Our Price: $8.95
Sale Price: $5.95
In Stock!
|
|
|
180 Motor w/ 8T 0.5M Pinion ( C ) A - Lama V3, V4 ** Off new Lama V4 ***
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme led fly bar Replacement Bars LONG R1M
|
Our Price: $3.29
Sale Price: $1.99
(Out of Stock)
|
|
|
These replaceable fly bar links will work with the Xtreme Led Fly bar. They are threaded and screw in for a fast replacement. These come in two lengths. Long for beginners and short for advanced fliers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Gear for Inner Shaft (for Esky Coaxials, BCX2, BCX3) R1L
|
|
Our Price: $4.00
In Stock!
|
|
|
Gear for Inner Shaft (for Esky Coaxials, BCX2, BCX3)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Outer Shaft Gear Set w/bearing CX2, CX3, V3, V4 R1L
|
|
Our Price: $6.95
In Stock!
|
|
|
Outer Shaft and Gear Set includes bearing
Direct replacement for CX, CX2, CX3, Lama V3, V4 etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Gear for Outer Shaft (for ESL410) R1L
|
|
Our Price: $2.95
In Stock!
|
|
|
Gear for Outer Shaft (for ESL410)
Replacement gear fits Xtreme outer shaft.
|
|
|
|
|
|
|
