|
|
|
|
|
|
Xtreme Hard Blade Upper
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Upper 3 pack (3 pairs)
|
|
Our Price: $9.45
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed. Includes 3 pairs of blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Lower
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Lower 3 pack (3 pairs)
|
|
Our Price: $9.45
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed. Includes 3 pairs of blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme led fly bar REPLACEMENT BARS
|
|
Our Price: $3.29
|
|
|
These replaceable fly bar links will work with the Xtreme Led Fly bar. They are threaded and screw in for a fast replacement. These come in two lengths. Long for beginners and short for advanced fliers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme LED fly bar CX/2, V3/V4
|
Our Price: $29.99
Sale Price: $24.99
You Save $5.00!
|
|
|
Features a machined center hub and replaceable bars. The leds will auto-magically turn on as it spins. Includes batteries. For performance you can replace the fly bars with short bars. Bars are sold separately. Choose red or blue leds.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme metal bearing housing
|
|
Our Price: $6.50
|
|
|
Reduces Shaft slop. This bearing housing has a very tight fit for zero slop. It comes with sand paper and you may have to sand down the shaft to get the bearing housing on the outer shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme motor brushes carbon (4)
|
|
Our Price: $3.69
|
|
|
Comes in a pack of four (2 required per motor)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme extended upper head w/inner shaft
|
|
Our Price: $12.99
|
|
|
Seperates upper and lower blades by 5mm to help elimanate blade strikes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Alum. Blade grip combo.
|
|
Our Price: $43.90
|
|
|
Includes upper and lower blades grips and a set of upper and lower hard blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Motor Heat sinks (one pair) CX2/V4
|
|
Our Price: $7.90
|
|
|
New Light Weight heat sinks made for the Xtreme 180 motors. This light weight heat sink has just the extra cooling needed without adding weight. The Xtreme 180 motor w/heat sink is gram lighter than the factory motor w/heatsink. Sold in pairs
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Aluminum Control Stick (3.0mm)-Blue
|
|
Our Price: $10.50
|
|
|
Aluminum Control Stick (3.0mm)-Blue
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme boom kit CX/2
|
|
Our Price: $21.90
|
|
|
Give your CX/2 a new Xtreme look with this complete boom kit. This kit comes with white parts. For $2.85 more you can get this kit in custom black which is only available from BoomTownHobbies.com.
To add a set of carbon fiber fins for $12.90 just check the box to the right.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme skid kit BCX/2
|
|
Our Price: $15.99
|
|
|
Give you CX/2 a new look with these Xtreme skids. A must have if using the Xtreme boom kit. This kit comes with white parts. For $1.85 more they are availble in custom black only available thru BoomTownHobbies.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme canopy w/ Black/Grey decals
|
Our Price: $10.99
Sale Price: $8.99
You Save $2.00!
|
|
|
This canopy comes clear and you paint it from the inside just like a lexan rc car body. The result is a very shinny smooth professional looking finish. Included is a decal sheet and window cut outs to make painting easy. Now available!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme canopy w/ Color decals
|
Our Price: $10.99
Sale Price: $8.99
You Save $2.00!
|
|
|
This canopy comes clear and you paint it from the inside just like a lexan rc car body. The result is a very shinny smooth professional looking finish. Included is a color tone decal sheet and window cut outs to make painting easy. Now available!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Metal Blade Grip- Upper - Blade CX2
|
|
Our Price: $19.90
|
|
|
Metal Blade Grip- Upper - Blade CX2
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Metal Blade Grip- Lower - Blade CX2
|
|
Our Price: $19.90
|
|
|
Metal Blade Grip- Lower - Blade CX2
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Pinion Gear Remover
|
|
Our Price: $15.90
|
|
|
Pinion Gear Remover
|
|
|
|
|
|
|
|
|
|
|
|
|
DN Power/ Tenergy 900mAH 10c CX2 Battery Pack
|
Our Price: $19.99
Sale Price: $18.65
You Save $1.34!
|
|
|
This Lithium polymer battery is rated at 900mAH 10C and is made for the Blade CX and CX/2. The stock battery is rated at 800mAh which means you will notice longer run times with this battery. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications. It is a direct replacement but a better battery. The DN Power batteries are high quality and an exceptional value! If you are looking for even more performance out of your battery please look at our DN Power chargers. They can charge two batteries at the same time and give a 100% charge compared to the e-flight charger which only charges the battery in safe mode to around 90% of full capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade CX2 combo packs
|
|
Our Price: $41.90
|
|
|
Xtreme Blade combo kits for CX2.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme SE180 Bearing motors (pair) Esky, Blade CX
|
|
Our Price: $32.90
|
|
|
Second Edition Ball Bearings 180 motor for Esky Lama, Robins,Comanche and Eflite BCX2. These motors have power!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Navigation Lights w/ Battery Alarm
|
|
Our Price: $19.90
|
|
|
Xtreme Navigation Lights w/ Battery Alarm
|
|
|
|
|
|
|
|
|
|
|
|
|
Tenergy 900 10C CX2 Battery Combo **2 battery combo**
|
|
Our Price: $32.99
|
|
|
2 Tenergy/DN power 900mAH 10c high output batteries for the Blade CX2.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Blue)
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Blue)
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Yellow)
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Yellow)
|
Our Price: $4.99
Sale Price: $3.89
You Save $1.10!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Over-Current protection / Reset-able Fuse- for 180 motors
|
|
Our Price: $5.20
|
|
|
For use between the motor and 4-in-1 control unit, to protect your expensive speed controller with the over-current protection PTC reset-able fuse devices.
During the crashes of the helicopter, the motor current draw will significantly increased because of the sudden stop of the rotor. The speed controller may be damaged if the user forget to pull down the throttle stick immediately after a crash.
This fuse will open the circuit if a high current passes through, but the fuse is reset-able in few minutes after cool down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Carbon Fiber fins
|
Our Price: $15.99
Sale Price: $12.90
You Save $3.09!
|
|
|
Replace the stock plastic Xtreme fin with this beautiful carbon fiber fin set for an extreme look! Choice of Black/grey carbon fiber or Silver carbon fiber.
*** Fits Xtreme CX2 and Lama V3 boom kits ***
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Fly-bar Rod with Center Hub
|
|
Our Price: $7.40
|
|
|
Replacement hub for the Xtreme LED fly-bar. Includes short bars.
|
|
|
|
|
|
|
|
|
|
|
|
|
DN Power/ Tenergy 900mAH 25C CX2 Battery Pack **New**
|
|
Our Price: $24.95
|
|
|
The newest DN Power battery upgrade for the Eflite Blade CX2. Not only do you gain 12% more flight time over stock battery, but now the pack can deliver more than twice the power with its 25C rating, which is beyond almost any other battery out there. As with all DN Power batteries for the Blade CX2, they fit the stock battery tray perfectly and work with the stock charger.
This Lithium polymer battery is rated at 900mAH 25C and is made for the Blade CX and CX/2. The stock battery is rated at 800mAh which means you will notice longer run times with this battery. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications. It is a direct replacement but a better battery. The DN Power batteries are high quality and an exceptional value! If you are looking for even more performance out of your battery please look at our DN Power chargers. They can charge two batteries at the same time and give a 100% charge compared to the e-flight charger which only charges the battery in safe mode to around 90% of full capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-flite Outer Shaft & Main Gear Set CX/2
|
|
Our Price: $8.99
|
|
|
Outer Shaft for the Blade CX2 and the original Blade CX.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme spare shaft for Extended inner shaft
|
|
Our Price: $3.95
|
|
|
Fits CX2 and Lama V3/V4 with Extended head. Replacement shaft only. Requires Extended head sold seperately.
|
|
|
|
|
|
|
