|
|
|
|
|
|
Xtreme boom kit Lama V3
|
Our Price: $22.99
Sale Price: $17.95
(Out of Stock)
|
|
|
Give your Lama V3 an Xtreme look with this carbon fiber boom kit. Don't forget to pick up the Xtreme skid kit too for the complete Xtreme look. Fits Lama V3 only!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Upper (1 pair)
|
Our Price: $4.99
Sale Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Hard Blade Lower (1 pair)
|
Our Price: $4.99
Sale Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
BoomTownHobbies Flybar combo (2 short flybars 1 set of weights)
|
Our Price: $11.99
Sale Price: $9.99
In Stock!
|
|
|
Fits CX, CX2, CX3, V3, V4. Includes two short fly bars and one set of fly bar weights. These fly bars are just a little bit shorter for more performance. Note: Fly bar link not included you will need to keep link off old fly bar.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Tail boom holder Lama V3
|
Our Price: $3.90
Sale Price: $2.65
In Stock!
|
|
|
Replacement Tail boom holder for part #ESL011
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Battery holder & receiver plate
|
|
Our Price: $6.50
In Stock!
|
|
|
Batery holder & receiver plate replacement for ESL008
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Tail Fin replacements Lama V3
|
Our Price: $3.90
Sale Price: $2.65
In Stock!
|
|
|
Tail Fin replacements for ESL011
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Tail blade holder Lama V3
|
Our Price: $3.90
Sale Price: $2.65
In Stock!
|
|
|
Tail blade holder replacement for ESL011
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Spare Head Cover for Extended Inner shaft
|
|
Our Price: $2.60
In Stock!
|
|
|
Spare Head Cover for Extended Inner shaft
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Battery for LED Fly-Bar
|
|
Our Price: $2.60
In Stock!
|
|
|
Replacement batteries for LED fly-bar
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Graphite tail boom
|
|
Our Price: $12.90
In Stock!
|
|
|
Replacement Graphite tail boom for ESL011
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Carbon Fiber fins Black
|
Our Price: $15.99
Sale Price: $12.90
In Stock!
|
|
|
Replace the stock plastic Xtreme fin with this beautiful carbon fiber fin set for an extreme look! Choice of Black/grey carbon fiber or Silver carbon fiber.
*** Fits Xtreme CX2 and Lama V3 boom kits ***
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Graphite Tail boom support pipes
|
|
Our Price: $5.30
(Out of Stock)
|
|
|
Optional Graphite Tail boom support pipes for Lama V3 boom kit
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme V2 Flexible Tail w/ Engine - Luminous color
|
|
Our Price: $11.80
In Stock!
|
|
|
V2 Flexible Tail w/ Engine -Luminous color for Lama V3
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Metal Fly-Bar Central Hub
|
|
Our Price: $6.50
In Stock!
|
|
|
Metal Fly-Bar Central Hub replacement for LED fly bar
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky 4in1 Control Unit (72 MHZ) for Lama 3, 4
|
|
Our Price: $39.99
(Out of Stock)
|
|
|
4in1 Mainboard Control Unit includes;
- Gyro
- ESC
- Mixer
- Receiver
This is for Lama V3. V4 (72 MhZ)
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Bearing and Collar Set - Lama V3, V4
|
|
Our Price: $3.50
In Stock!
|
|
|
Bearing and Collar Set - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Bearings 4x8x3 (2)
|
|
Our Price: $5.95
In Stock!
|
|
|
Bearings 4x8x3 (2)
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Inner Shaft - Lama V3, V4
|
Our Price: $4.99
Sale Price: $3.99
In Stock!
|
|
|
Inner Shaft - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Main Blade Grip Set - Lama V3, V4
|
|
Our Price: $3.99
In Stock!
|
|
|
Main Blade Grip Set - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Plastic blade A - Lama V3, V4
|
|
Our Price: $5.99
In Stock!
|
|
|
Plastic blade A - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Plastic blade B - Lama V3, V4
|
|
Our Price: $5.99
In Stock!
|
|
|
Plastic blade B - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Canopy Honey Bee Lama 4 (BLUE)
|
|
Our Price: $9.99
In Stock!
|
|
|
Canopy Honey Bee Lama 4 (BLUE)
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky V3 V4 A Motor w/pinion
|
|
Our Price: $8.00
In Stock!
|
|
|
180 Motor w/ 8T 0.5M Pinion ( C ) A - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky V3 V4 B Motor w/pinion
|
|
Our Price: $8.00
In Stock!
|
|
|
180 Motor w/ 8T 0.5M Pinion ( C ) B - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky CNC Aluminum Central Holder
|
|
Our Price: $12.99
In Stock!
|
|
|
E-sky CNC Aluminum Central Holder for Lama V3/V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky CNC Aluminum Collet Set
|
|
Our Price: $46.00
In Stock!
|
|
|
E-sky CNC Aluminum Collet Set for Lama V3/V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky CNC Aluminum Central hub and shaft set
|
|
Our Price: $10.50
In Stock!
|
|
|
E-sky CNC Aluminum Central hub and shaft set for Lama V3/V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Bearing 2x6x3
|
|
Our Price: $7.89
In Stock!
|
|
|
E-sky Bearing 2x6x3
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme SE180 Bearing motors (pair) ** special price **
|
Our Price: $32.90
Sale Price: $23.99
In Stock!
|
|
|
Second Edition Ball Bearings 180 motor for Esky Lama, Robins,Comanche and Eflite BCX2. These motors have power!
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Aluminum Lower Rotor Hub, Lama V3,V4
|
|
Our Price: $14.40
In Stock!
|
|
|
Xtreme Aluminum Lower Rotor Hub, Lama V3,V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Aluminum Swash Plate, Lama V3,V4
|
|
Our Price: $15.80
In Stock!
|
|
|
Xtreme Aluminum Swash Plate, Lama V3,V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Blue)
|
Our Price: $4.99
Sale Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Blue)
|
Our Price: $4.99
Sale Price: $2.99
In Stock!
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Upper-Yellow)
|
Our Price: $4.99
Sale Price: $2.99
(Out of Stock)
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Blade for Lama and CX2 - 1 pair (Lower-Yellow)
|
Our Price: $4.99
Sale Price: $2.99
(Out of Stock)
|
|
|
Direct replacment for Lama V3 and V4 helis. Blade CX2's require blade grips installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Over-Current protection / Resetable Fuses- for 180 motors 1 pair PTC
|
|
Our Price: $5.20
(Out of Stock)
|
|
|
For use between the motor and 4-in-1 control unit, to protect your expensive speed controller with the over-current protection PTC reset-able fuse devices.
During the crashes of the helicopter, the motor current draw will significantly increased because of the sudden stop of the rotor. The speed controller may be damaged if the user forget to pull down the throttle stick immediately after a crash.
This fuse will open the circuit if a high current passes through, but the fuse is reset-able in few minutes after cool down.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-SKY Crystals 72.210 - Channel 21
|
|
Our Price: $5.85
In Stock!
|
|
|
2pcs one for TX and one for RX
Channel 21
|
|
|
|
|
|
|
|
|
|
|
|
|
Helitek Supershaft combo 3 pack. 3 inner shafts CX2 V3,V4
|
|
Our Price: $18.99
In Stock!
|
|
|
These super shafts are so strong you may never need to buy inner shafts again! This combo pack comes with 3 sizes. Stock length, extended 1.0 for less blade strikes and extended 2.0 zero blade strikes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Helitek Supershaft 2.0 fits CX2, CX3, V3, V4
|
|
Our Price: $9.99
(Out of Stock)
|
|
|
This is the 2.0cm supershaft made by Helitek RC.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Landing Skid - Lama V3
|
|
Our Price: $4.99
In Stock!
|
|
|
Esky Landing Skid - Lama 3
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Carbon Fiber fins Silver
|
Our Price: $15.99
Sale Price: $12.90
In Stock!
|
|
|
Xtreme Carbon Fiber Fins Silver Fits Xtreme Blade CX2 and Lama V3 boom kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Ext. Head w/Inner Shaft Ver 2 (+8 mm) Lama V3 V4
|
|
Our Price: $12.80
In Stock!
|
|
|
Reduce blade strikes with this taller aluminum head with inner shaft.
Fits Esky Lama V3, V4 and equivalent
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Receiver Antenna wire Cable
|
|
Our Price: $2.60
(Out of Stock)
|
|
|
Xtreme Receiver Antenna Cable (600mm x 2 pcs)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme 180 motor heat sink (Silver)for Lama V3 (pair)
|
|
Our Price: $7.90
(Out of Stock)
|
|
|
180 motor heat sink (Silver)for Lama V3
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky 2.4g Transmitter ** No Manual **
|
Our Price: $44.95
Sale Price: $38.50
In Stock!
|
|
|
Esky 2.4 g Transmitter. Removed from new Helicopter kit. Works with Esky 2.4g receivers sold separately. Compatible with Esky 2.4g helis.
Note: Product shipping weight is 2 pounds and shipping cost will be slightly increased.
Requires 8 AA batteries not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Parts for Extended shaft Lama V3 V4
|
|
Our Price: $2.85
In Stock!
|
|
|
Spare parts set for the version 2 extended upper head.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 Main Frame
|
List Price: $5.95
Our Price: $5.95
In Stock!
|
|
|
Removed from new V3.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme LED fly bar Blue
|
Our Price: $24.99
Sale Price: $16.99
In Stock!
|
|
|
Features a machined center hub and replaceable bars. The leds will auto-magically turn on as it spins. Includes batteries. For performance you can replace the fly bars with short bars. Bars are sold separately. Choose red or blue leds. Fits CX, CX2, CX3, Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Digital Servo
|
|
Our Price: $11.95
In Stock!
|
|
|
Esky Digital Servo.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 Tail section
|
Our Price: $7.99
Sale Price: $6.99
(Out of Stock)
|
|
|
Tail Section for Lama V3 Yellow green color
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 Cabin Canopy
|
|
Our Price: $5.85
(Out of Stock)
|
|
|
Side decals for Lama V3 ** Off new Lama V3 **
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 Frame decals ** Open Box ***
|
|
Our Price: $0.85
In Stock!
|
|
|
Side decals for Lama V3 ** Off new Lama V3 **
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky V3 V4 A Motor w/pinion ** Open Box No Screws **
|
|
Our Price: $6.95
In Stock!
|
|
|
180 Motor w/ 8T 0.5M Pinion ( C ) A - Lama V3, V4 ** Off new Lama V4 ***
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky V3 V4 B Motor w/pinion ** Open Box No Screws **
|
|
Our Price: $6.95
In Stock!
|
|
|
180 Motor w/ 8T 0.5M Pinion ( C ) B - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 bell link set (4)
|
|
Our Price: $3.99
(Out of Stock)
|
|
|
Connects between swash plate and sevro
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3 screw set
|
|
Our Price: $3.99
In Stock!
|
|
|
Includes all screws and the brass washer
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Gear for Inner Shaft (for Esky Coaxials, BCX2, BCX3)
|
|
Our Price: $4.00
In Stock!
|
|
|
Gear for Inner Shaft (for Esky Coaxials, BCX2, BCX3)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Outer Shaft Gear Set w/bearing (for Esky Coaxials, BCX2, BCX3)
|
|
Our Price: $6.95
In Stock!
|
|
|
Outer Shaft and Gear Set includes bearing
Direct replacement for CX, CX2, CX3, Lama V3, V4 etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Gear for Outer Shaft (for ESL410)
|
|
Our Price: $2.95
In Stock!
|
|
|
Gear for Outer Shaft (for ESL410)
Replacement gear fits Xtreme outer shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Rotor Head
|
|
Our Price: $3.49
In Stock!
|
|
|
Rotor Head - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
AFC Hard Blade (A-Upper), black 1 pair
|
Our Price: $3.99
Sale Price: $2.99
In Stock!
|
|
|
AFC Hard Blade (A-Upper), black 1 pair
|
|
|
|
|
|
|
|
|
|
|
|
|
AFC Hard Blade (B-Lower), black 1 pair
|
Our Price: $3.99
Sale Price: $2.99
In Stock!
|
|
|
AFC Hard Blade (B-Lower), black
Requires blades grips on Blade CX2, CX3.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme LED fly bar RED
|
Our Price: $24.99
Sale Price: $16.99
In Stock!
|
|
|
Features a machined center hub and replaceable bars. The leds will auto-magically turn on as it spins. Includes batteries. For performance you can replace the fly bars with short bars. Bars are sold separately. Choose red or blue leds. Fits CX CX2, CX3 Lama V3 V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme metal bearing housing
|
|
Our Price: $6.50
(Out of Stock)
|
|
|
Reduces Shaft slop. This bearing housing has a very tight fit for zero slop. It comes with sand paper and you may have to sand down the shaft to get the bearing housing on the outer shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme metal blade grips for Esky Lama (Upper or Lower)
|
|
Our Price: $18.99
(Out of Stock)
|
|
|
Upper or Lower grips for Lama V3/V4. *** Sold as individuals ***
Two sets needed per Helicopter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme motor brushes carbon (4)
|
|
Our Price: $3.69
In Stock!
|
|
|
Comes in a pack of four (2 required per motor)
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme motor brushes silver combo (2 packs for 2 motors)
|
|
Our Price: $6.45
(Out of Stock)
|
|
|
Includes two packages or (4 brushes) which will replace the brushes for two motors. The silver brushes provide more power than the stock carbon brushes however they do cost more.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Lama V3/V4 CNC swash plate
|
|
Our Price: $19.95
In Stock!
|
|
|
E-sky Lama V3/V4 CNC swash plate
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Canopy V3 Clear
|
|
Our Price: $8.99
(Out of Stock)
|
|
|
Comes clear with a decal sheet. It should be painted from the inside just like a lexan car body.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme graphite skids w/battery holder V3
|
Our Price: $17.99
Sale Price: $12.95
(Out of Stock)
|
|
|
This Xtreme skid kit includes a battery holder and will give the lama V3 a Xtreme look when used with the Xtreme boom kit. Don't forget to pick up the Xtreme canopy for a compete look.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Flexible Tail V3 Yellow
|
|
Our Price: $10.90
In Stock!
|
|
|
New version of Flexible Tail for Lama v3 Fake Engine and side bucket is included, a tradition appearance of Lama helicopter is realized. Highly resistant to impact and twist, just like the version one tail. The flexible tail is factory pre-assembled.
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme spare shaft for Extended inner shaft
|
|
Our Price: $3.95
In Stock!
|
|
|
Fits CX2 and Lama V3/V4 with Extended head. Replacement shaft only. Requires Extended head sold seperately.
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Stabilizer set - Lama V3, V4
|
|
Our Price: $4.65
(Out of Stock)
|
|
|
Stabilizer set - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Gear and Shaft Set B - Lama V3
|
|
Our Price: $8.00
In Stock!
|
|
|
Gear and Shaft Set B - Lama V3
|
|
|
|
|
|
|
|
|
|
|
|
|
E-sky Gear and Shaft Set A - Lama V3, V4
|
|
Our Price: $8.00
In Stock!
|
|
|
Gear and Shaft Set A - Lama V3, V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme Ball linkrod set V3 V4
|
|
Our Price: $2.60
In Stock!
|
|
|
Xtreme Ball linkrod set V3 V4
|
|
|
|
|
|
|
|
|
|
|
|
|
Xtreme 850 mAh 25c Li-Po battery, Lama V3,V4, HBFP
|
|
Our Price: $21.50
(Out of Stock)
|
|
|
Specs. Pack: 850mAh 7.4V Connector: JST Plug, Balance Charge Plug Size: 56x30x15mm Weight: 45g Discharge: 18-20C
|
|
|
|
|
|
|
