Adapters & Misc
Tools & Accessories
Tools & Accessories
Honey Bee FP
MCX MCX2 Parts
CX CX2 CX3 Parts
Lama V4/Dauphin Parts
Lama V3 Parts
Blade 400 Parts
MicroHeli Aluminum XL Tail Boom w/Horizontal Fin System MCPX
Stock Status:(Out of Stock)
The Aluminum XL Tail Boom w/Horizontal Fin system is designed with a 20mm extended tail boom to reduce the load of the tail motor and increase tail response and performance on the Blade mCP X helicopter. It's directly replaced the stock tail system. The Aluminum XL Tail Boom w/Horizontal Fin system is CNC machined from aircraft Aluminum, Carbon fiber, Carbon rod and Delrin precisely to minimize any unwanted tail vibration and twisting to allow the tail system to perform more efficiently during 3D maneuvers.
And yet, the Tail Motor Mount and Tail Boom system are made of aluminum to dissipate and prevent overheating tail motor under high speed condition.
The Aluminum XL Tail Boom w/Horizontal Fin system is very light weight only 2.04gram.
The Aluminum XL Tail Boom w/Horizontal Fin system design will bring the most efficient tail response and the stylish look to your Blade mCP X helicopter.
1 x Aluminum XL Tail Boom MH-MCPX016XL
1 x Aluminum Tail Motor Mount
1 x Carbon Fiber Vertical Fin MH-MCPX064VF
1 x Carbon Fiber Horizontal Fin MH-MCPX064HF
1 x Delrin Horizontal Fin Mount
1 x Carbon Rod Linkage
1 x Aluminum Vertical Fin Pin
100% CNC machined Aluminum XL Tail Boom, Aluminum Tail Motor Mount, Carbon Fiber, Carbon Rod and Delrin
20mm extended tail boom to reduce the load of the tail motor and increase tail response
Minimizes any unwanted tail vibration and twisting to allow the tail system to perform more efficiently
Dissipates and prevent overheating tail motor under high speed condition
Very light weight and stylish design Aluminum XL Tail Boom w/Horizontal Fin system
Direct replacement part for Blade mCP X helicopter
Read and follow carefully the Assembly Instruction
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly
Manual & Instruction included
MicroHeli Carbon Fiber Main Blades MCPX
Xtreme Landing Skid Rubber Nuts 4.5x1.5x5mm MR2
Xtreme Pinion Gear Remover 1.0mm Shaft for Micro Motors MR2
Xtreme Motor Pinion 9 (1mm hole 0.3M) MCPX MR2L
Tenergy 3.7V 250mah 25c mCPX battery R6L
Sale Price: $6.85
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Copyright © 2006 BoomTownHobbies Inc.. All Rights Reserved.